Double D-Ring Belt made with 1-1/2 inch Patterned Polyester Webbing. Patterned Polyester webbing 1-1/2 inch has a breaking strength of 4971 pounds with a thickness of 0.060 of an inch. Metal and Plastic D-Rings are not rated.

Double D-Ring Belts; so simple, yet so functional. Sew 2 D-rings on the end of a length of webbing and you get a belt that can be used for many occasions. Double D-Ring Belts can be used for other non-critical applications such as: tiedown straps for packs, saddle bags, exercise straps for stretching, containment straps, or a general utility strap. Your d-ring options include: metal heavy wire, light wire, plastic (black or white), stainless steel (heavy wire or light wire), solid brass (heavy wire or light wire).

Double D-Ring Belts made with patterned polyester webbing are perfect for heavy loads with high abrasion. Polyester has the best attributes of flat nylon (abrasion resistance) and heavyweight polypropylene (UV protection, water resistance).

Strapworks’ "Patterned Polyester" is polyester that has been sublimated. Sublimation is a process that virtually tattoos the ink into the webbing by turning a solid ink into a permeating gas. This process is done in house and it allows for great detail and vivid custom colorfast colors. Polyester is the only material we carry that is consistent in its ability to be sublimated.

Double D-Ring Belts made with polyester webbing has the same attributes and characteristics as patterned polyester. Strapworks' polyester webbing is also sublimated, but is sublimated in solid colors. Polyester has all of the benefits of Flat Nylon, high breaking strength, high abrasion resistance, soft, smooth, and shiny. It also has the benefits of polypropylene, low water absorption, high UV protection, and it is also mildew and rot resistant.

Double D-Ring Belt made with flat nylon webbing is the webbing of choice for high abrasion applications. It is not recommended for use in or around water continuously because it is less water resistant, making it susceptible to mildew and rot.

Double D-Ring Belt made with heavyweight polypropylene webbing are suitable for medium duty applications. However, polypropylene does not have good abrasion resistance, so it is not recommended for use against rough edges.

Double D-Ring Belt  made with lightweight polypropylene webbing are ideally suited for outdoor light duty use. Other than breaking strength and webbing thickness, they have the same attributes as heavyweight polypropylene webbing.

Belt sizes are as follows:

To shorten, simply cut the end with scissors and melt the end with a lighter.

The sublimation process may take an extra 2-3 days to fulfill your order. For more information on sublimation and custom designed straps, please email custom@strapworks.com.