The blade of our JR Hot Cutter heats up to approximately 1200 degrees Fahrenheit. The JR Hot Cutter’s extreme heat and stainless steel blade are perfect for cutting and sealing all sorts of synthetic webbing, rope and cordage quickly and neatly. The blade heats to full temperature in just about 1 minute and cools down in approximately 5 minutes once the unit is turned off. The JR Hot Cutter can be tabletop mounted or used portably; simply plug your JR Hot Cutter into any standard (120v) wall socket and you are ready to cut.

After using your JR Hot Cutter for a time, you may begin to notice build-up on the blade. To clean your blade, simply unplug your unit and let the blade cool completely; then, using a screwdriver, loosen the screws that hold the blade in place and remove the blade from the unit. Use a fine grit sandpaper to remove the build-up, replace the blade in the unit and tighten the screws (being careful not to over tighten the screws).

 Of course, eventually your blade will need replacing and we can help you there; replacement blades for you JR Hot Cutter can be ordered at strapworks.com. (Just click here and we'll take you right to them.)

When you use your JR Hot Cutter, we here at strapworks.com remind you to use all proper care and caution while operating your JR Hot Cutter as misuse or abuse can lead to dangerous conditions and possibly injury!

Follow us on Twitter for links to daily specials, "Like" us on Facebook for access to a coupon code for your next order & subscribe to our Youtube Channel.