Reverse Sof-tie motorcycle cam strap made with polyester webbing. Polyester webbing 1 inch has a breaking strength of 3800 pounds with a thickness of 0.060 of an inch.

Reverse Sof-tie Motocycle Cam Strap; This strap is an amazing re-creation of our Softie Motorcycle Cam Strap. The notable difference is the fact that the Softie feature is located in the tag end rather than the cam end of the strap. This setup is good for situations involving a crowded load of motorcycles and ATV's. The design of the Reverse Softie Motorcycle Cam Strap is that it relocated the cam buckle down to the anchoring point instead of being up by the motorcycle or ATV. This reduces the chances of scratching or scuffing the body work of your motorcycles and ATV's. The Reverse Softie Motorcycle Cam Strap also contains a 5 inch open loop sewn into the tag end of the strap that allows you to easily cinch down your ATV, motorcycle, or whatever else you can think of using this strap for. A strap is only as strong as its weakest link. A guide line for finding a safe working load is to take the breaking strength and divide it by one third. For example, Strapworks’ polyester webbing 1 inch has a breaking strength of 3800 pounds, so a safe working load is 1266 pounds. Your end hardware options include: vinyl coated s-hooks, safety s-hooks with clip, standard oval carabiners, and locking carabiners. You also need to consider your hardware and stitching. The 1 inch moto cam buckle is included with a rating of 1200 pounds. You also need to calculate your safe working load for your buckles and your stitching. When in doubt, buy 1 strap and test it for your application.

Reverse Sof-tie motorcycle cam Straps made with heavyweight polypropylene webbing are suitable for medium duty outdoor applications. Heavyweight polypropylene webbing has excellent UV protect and does not absorb water quickly giving it better better resistant to mildew and rot resistance. However, polypropylene does not have good abrasion resistance, so it is not recommended for use against rough edges.

The sublimation process may take an extra 2-3 days to fulfill your order. For more information on sublimation and custom designed straps, please email custom@strapworks.com.

*When selecting the powder coating option, there are two things to keep in mind, one powder coating is not an option with stainless steel cam buckles. Two, to achieve a sure grip on powder coated cams; it is imperative that the user puts pressure on the backside of trigger and push it into the webbing. It may move approximately 1 inch before establishing a secure grip on the material.

For more information on the 1 inch Motorcycle Cam Buckle, please click to go to the Motorcycle Cam Buckle technical specs page.