|
 |
|
|
 |
|
|
 Tubular Webbing
The sublimation process may take an extra 3 days to a week to fulfill your order and the webbing color may vary from print to print.
Note: Webbing Lengths over 30 ft may contain splices. If you wish not to receive splices on lengths over 30 ft please specify in "order notes".
Please note that tubular nylon, depending on the mill, can have no tracer and up to 6 tracer threads running the entire length of the webbing. This tracer is usually located on one side of the webbing. If this is an issue, consider tubular polyester webbing, which has no tracer thread. You can also state in the notes / comments section when ordering that you would like no tracer threads, but be aware that it might not be possible.
All Webbing is "Sold by the Foot."Not all colors are available in all widths.
*** Tubular Webbing is always measured from edge to edge.
That measurement does NOT refer to the inner dimension of the webbing. ***
STEP 2: Choose your Webbing Size (click on the webbing size to move to the final step)
 Nylon:
- Thickness of approximately 0.06 to 0.09 of an inch
- Breaking strength of 2000 to 5000 pounds
- Melting point of 480 degrees fahrenheit
- Roll Sizes are 150, 300, and 400 feet, depending on webbing size
Available Sizes: 1/2 Inch - 3/4 INCH Black - 1 Inch - 1 1/4 INCH Yellow - 1-1/2 INCH - 2 INCH
Tubular Webbing is also available in:
 Patterned Polyester:
Available Sizes: 1 Inch - 2 Inch
 Sublimated Solid Color:
Available Sizes: 1 Inch - 2 Inch
|
|
|
|
|
