Double O-Ring Belt made with 1 inch Heavyweight Polypropylene Webbing. Heavyweight polypropylene webbing 1 inch has a breaking strength of 900 pounds with a thickness of 0.060 of an inch. Metal O-Rings are not rated.
Double O-Ring Belts; just like the Double D-Ring Belts, they so simple, yet so functional. Sew 2 O-rings on the end of a length of webbing and you get a belt that can be can be used for other non-critical applications such as: tiedown straps for packs, saddle bags, exercise straps for stretching, containment straps, or a general utility strap. Your o-ring options include: 1 inch metal, 1 inch stainless steel, and 1 inch solid brass.
If used other than belts, keep in mind the characteristics of the different types of webbing.
Double O-Ring Belts made with heavyweight polypropylene webbing are suitable for medium duty applications. It has excellent UV protection and does not absorb water quickly. However, polypropylene does not have good abrasion resistance, so it is not recommended for use against rough edges.
Strapworks’
"Patterned Polyester" is polyester that has been sublimated. Sublimation is a process that virtually tattoos the ink into the webbing by turning a solid ink into a permeating gas. This process is done in house and it allows for great detail and vivid custom colorfast colors. Polyester is the only material we carry that is consistent in its ability to be sublimated.
Double O-Ring Belts made with polyester webbing have the same attributes and characteristics as patterned polyester. Strapworks' polyester webbing is also sublimated, but is sublimated in solid colors. Polyester has all of the benefits of Flat Nylon, high breaking strength, high abrasion resistance, soft, smooth, and shiny. It also has the benefits of polypropylene, low water absorption, high UV protection, and it is also mildew and rot resistant.
Belt sizes are as follows:
- Regular:.....up to 38 inch waist (48 inches in length)
- Large:........up to 48 inch waist (60 inches in length)
- XLarge:......up to 60 inch waist (72 inches in length)
To shorten, simply cut the end with scissors and melt the end with a lighter.
The sublimation process may take an extra 2-3 days to fulfill your order. For more information on sublimation and custom designed straps, please email
custom@strapworks.com.